If you don’t have space for an in-ground garden or access to a community garden, planting in 5-gallon containers can be a great option for making a “bucket garden” along a sunny walkway, balcony, or porch. In this video, Extension Specialist Jon Traunfeld demonstrates how to make a self-watering container garden using 5-gallon buckets and a few basic materials. You can get these buckets for free from restaurants, bakeries, and grocery stores. They are used for shipping food products and then they are usually thrown away afterward. This is a great way to give them a second use!
Tomatoes, peppers, and basil are some of the most popular plants to grow in a bucket garden. It is too late to start those plants this season, but in late summer, you can still plant kale and other leafy greens, carrots, beets, and perennial herbs. Use our Vegetable Planting Calendar as a guide.
Instructions for the self-watering bucket garden are also available on the University of Maryland Extension website, on the self-watering containers page.
By Christa K. Carignan, Coordinator, Digital Horticulture Education, University of Maryland Extension Home & Garden Information Center. Read more posts by Christa.
Before using a pesticide, read the label. Photo: Oregon Department of Agriculture, CC.
You have a pest problem in your garden – maybe it is hungry insects feeding on your vegetables, or stubborn weeds taking over your flower patch, or fungal diseases killing your lawn. You might consider using pesticides (which include insecticides, herbicides, and fungicides), especially if the problem seems widespread or severe. How do you choose the right pesticides and apply them correctly to support a healthy and thriving garden? How do you ensure your food plants remain safe for consumption and adverse impacts on beneficial species and soil health remain minimal?
Choosing the right pesticide
Home gardeners can generally choose between two types of pesticides: general use pesticides and minimum risk pesticides. Both pesticide types come with labels that explain how to safely handle, use, and dispose of the products. The labels of general use pesticides are reviewed by the Environmental Protection Agency (EPA) and will have an EPA registration number (highlighted by the blue rectangle on Figure 1), typically on the back panel. The labels of minimum risk pesticides are less extensive and are not reviewed by the EPA as they pose minimal risks to humans and the environment. Since these labels lack an EPA registration number, you can verify the product’s authenticity by contacting the Maryland Department of Agriculture’s State Chemist Section (410-841-2721). Alternatively, you can check out this list of approved minimum risk pesticide substances (PDF).
Figure 1: First representative label (back panel)
Regardless of the pesticide type, it is important to select a pesticide that has a narrow activity range. If your pest is an insect, you would ideally want a pesticide that targets insects. It would be even better if you could narrow down your insect pest – is it a caterpillar, beetle, or aphid? Some pesticides are more effective against certain pest insects (for example, see the product in Figure 2) and are therefore less likely to harm non-target insects. If you are unable to identify your pest, you can submit questions and photos to the University of Maryland’s Ask Extension service. Ask Extension will help identify the pest and recommend a course of action.
Another important criterion for pesticide selection is human safety, which can be determined from the signal words on the front panel of the label (see the purple rectangle highlighted in Figure 2). Danger signifies high toxicity, warning signifies moderate toxicity, and caution signifies low toxicity. A pesticide that is virtually non-toxic may have no signal word. Ease of use and application frequency can also help make your choice, as it may not always be feasible to measure and mix or frequently apply the product. This information is typically part of the section on directions for use, often found by peeling open the entire label (see the black rectangle highlighted in Figure 1).
Figure 2: Second representative label (front panel)
What else to look for on the pesticide label
Labels also include the following information on the front panel (see Figure 2): product brand name, ingredients, and the statement “Keep out of reach of children”. Other information found typically on the back panel (see Figure 1, which includes the label peel) are precautionary and other hazard statements, first aid, and storage and disposal sections. It is important to read all these sections properly, including the entirety of the directions for use, prior to the use of the pesticide.
The precautionary statement typically includes personal protective equipment that needs to be worn during pesticide applications (for example, full-length clothes, gloves, and eye protection) and informs the period of time during which one must not enter or come into contact with the treated area. The signal words are repeated in this section.
Hazard statements warn of potential hazards to the environment, including soil, water, air, wildlife, and nontarget plants. An example warning statement is “This product is highly toxic to bees”. This section may also include possible fire, chemical, or explosion hazards posed by the product.
First aid section recommends steps to be taken in case of accidental exposure or poisoning. The instructions vary in accordance with the route of pesticide exposure (swallowing, inhaling, contact, and eye), and include statements like “sip a glass of water if able to swallow”, and “take off contaminated clothing and rinse skin with water for 15-20 minutes”. Often, there is information on who to contact in case of a medical emergency. If you need to visit an emergency health provider, remember to take the pesticide label with you.
Storage and disposal sectionprovides information on how to store the product (for example, “store in the original container in a cool and dry place” and “protect from freezing”) and dispose of it (for example, “triple rinse the empty container” or “place the empty container in the trash”). The Maryland Department of Agriculture has often had an annual program where one could recycle an empty pesticide container for free. If you would like to dispose of unused pesticides, follow the instructions in the disposal section. Never dispose of pesticides down any indoor or outdoor drain. Many Maryland counties offer options to safely recycle or dispose of household hazardous waste, including lawn and garden pesticides. Current or retired farmers and producers can also avail of a free pesticide disposal program offered by the Maryland Department of Agriculture.
Directions of use section instructs how to properly use the product. This section typically includes a description of intended uses, mixing and application methods, use rates, and sites where the product may be used. It can also include application restrictions – this consists of statements like “do not apply if rain is predicted within the next 48 hours” or “do not apply when bees are actively foraging”. In many labels, application restrictions are also found within the hazard statements section.
Why is it important to follow the label?
A pesticide is any substance that prevents, destroys, repels, or mitigates pests. Thus, by nature, pesticides negatively impact living organisms. Federal law states that the EPA must ensure that pesticides entering the marketplace do not cause “unreasonable adverse effects to humans or the environment”. To carry out this mandate, the EPA assesses a variety of factors, including data on the pesticide’s chemistry, human health effects, environmental effects, etc. These data help inform the label language ̶ if the label is appropriately followed, the pesticide product should not cause unreasonable adverse effects to humans or the environment. For example, if a pesticide is highly toxic to fish, the hazard statement of the label would include a sentence like “Do not allow pesticide to enter or run off into storm drains, drainage ditches, gutters, or surface waters”. Applicators can be protected from unreasonable adverse effects by complying with precautionary statements like “Avoid contact with eyes” and “Wear chemical-resistant gloves”. Pesticide use/application rates are set to prevent hazardous quantities from entering the environment, including the infested plants you would like to consume.
Given the label’s critical role in minimizing a pesticide’s negative impacts, it is little wonder that the label is the law. Remember, if you use pesticides improperly, you are legally responsible for any consequences that may occur!
A few times a year I like to take a moment to assess the vegetables I’m growing, their positives and negatives, and whether I’ll grow them again. This year I’m growing a few varieties new to me, so I’m going to look at those today: two tomatoes and one tomatillo.
Let’s start with the tomatillo. This is not a vegetable I always grow, because it takes up space–two plants are needed for cross-pollination, and they are not small plants–and because I always seem to have insect issues. Both those things are true this year as well, and yet I’m glad to have been tempted by catalog copy and fallen for Chupon de Malinalco tomatillo. It just isn’t like anything I’ve grown before.
The fruits are huge–over two inches long on average–and generally pear-shaped. They ripen quickly to a bright yellow, and the flavor is sweet-tart, great for salsas. The negatives: they’re hard to keep up with, and fall off the plant when fully ripe. Once on the ground, or even when hanging low on the plants, they get eaten. I don’t know by whom, though it could be rabbits, since they get into our community garden all the time. The fruits higher up are not safe either, since fruitworms and other pests get to them, and often I’ve removed the husk to find so much damage it’s not worth cutting away the bad parts. But with these larger fruits, often the damage is minimal and I can save some parts, which is an advantage over the smaller tomatillos I’ve grown before.
Where I grew up, we did not have a county fair, but instead a “Buckwheat Festival” which celebrated buckwheat pancakes. I’ve often heard stories about “old timers” planting buckwheat because it could thrive in poor soils. Buckwheat is not as well known or common as it was several years ago; however, it does have the potential to be a great addition to your landscape and would be a wonderful summer cover crop, which is just one way to help improve soils for a more climate- resilient garden.
Positives about buckwheat include that it matures quickly, is easily seeded by broadcasting, is relatively inexpensive to purchase by seed, is not “fussy” about where it grows, and germinates quickly. It does not mind low-pH soils and can even out-compete weeds! It has shallow roots and is easily terminated — so planting a new crop after it is no problem — or, if it is still growing in the fall of the year, a frost will kill it. Lastly, it is a wonderful nectar and pollen source for a wide variety of insects.
Persistent wildfire smoke is new for Maryland gardeners. Experts seem to agree that smoke and ash do not pose a health risk for garden produce. Smoke diffuses sunlight but will probably not significantly reduce the total amount of light for photosynthesis. We have not heard/seen any reports of gardeners picking up smoky flavors in harvested greens or other vegetables or fruits.
Wash all produce prior to eating it raw or cooking with it
Wear an N-95 quality mask when working outside on days when wildfire smoke worsens air quality
Hose off plants if a noticeable soot layer develops from prolonged, intense smoke
Wildfire smoke has been shown to boost the levels of ozone and other air pollutants which can injure plants. Watermelon, squash, pumpkin, beans, and potato are especially vulnerable to high ozone levels (above 75 ppb).
Drought and damaging storms
Wildfire smoke interfered with weather patterns and likely contributed to cooler and drier weather across much of the state.
Mid-May through June:
Lower average temperatures
75% of state in moderate drought on July 3rd
Slow start for warm-season crops
July:
High heat and humidity
Spotty rainfall
Insect and disease issues increasing
The Maryland Department of the Environment announced a Drought Watch on July 10, encouraging voluntary reduction in residential water use.
Welcome back to Beyond Broccoli (earlier parts here) where in this final edition we will finally get around to talking about broccoli (and its flowering friends).
Imagine you’re strolling through your vegetable garden in June (maybe a warmer June than we just had) and you notice that a lot of the brassica crops you planted in the spring look like this:
In fact, they are bolting. It’s a response to heat and other stresses; the plant will go to flower and then (assuming the flowers are successfully pollinated) will produce seed. Reproduction means, for the plant, that it’s been successful and can die happy. Of course for the gardener it doesn’t always mean success. We might have wanted that mizuna to produce lots more edible leaves before bolting. But before you yank out the plant and toss it on the compost pile, do me a favor. Snip off that little cluster of flower buds and eat it.
In this month’s episode of The Garden Thyme Podcast, we are excited to celebrate National Pollinator Week ( June 19-25, 2023)! A pollinator is any animal that visits flowering plants and moves pollen from flower to flower, which helps plants reproduce, making fruits and seeds. In North America pollinators include bees, butterflies, moths, flower flies, beetles, and wasps. Worldwide, approximately 1,000 plants grown for food, beverages, fibers, and spices need to be pollinated by animals.
We also have our:
Native Plant of the Month – Beardtongues (Penstemon digitalis and P. hirsutus) ~16:40
Bug of the Month – Fig wasps (Agaonidae sp.) ~21:18
The Garden Thyme Podcast is brought to you by the University of Maryland Extension. Hosts are Mikaela Boley, Senior Agent Associate (Talbot County) for Horticulture; Rachel Rhodes, Agent Associate for Horticulture (Queen Anne’s County); and Emily Zobel, Senior Agent Associate for Agriculture (Dorchester County).
